Skip to Content

WV 40


         WV 40

Characteristics:

  •   for use with SYS 40
  •   coarse and fine adjustments
  •   with a fine-thread screw or micrometer
  •   for vertical or horizontal use
  •   deformation-resistant aluminium
  •   reflection-poor, black anodized

 

Ways of installing:

  •   on slide
  •   with ADP 40-DTF on the pin

The angular adjustment stages WV 40 combine coarse adjustment (360°) with fine adjustment. By loosening the clamping screw on the adjustment hoop, the mounting inserts can be adjusted infinitely. When the clamping screw is tightened, the mounting inserts can be rotated 25° (±12.5°) with a micrometer or a fine-thread screw.

When vertically mounted in SYS 40, the WV 40 enables, with their 20 mm aperture, the adjustment of mounted optics (ø 25 mm / 25.4 mm (1")).

A horizontal mounting in SYS 40 is possible: either with a RT 40-40 slide (upper edge WV 40, 5 mm below system height) or with the two RT 40-10-R-WV40 slides (upper edge WV 40, 10 mm below system height).