Skip to Content

TRANS 40C


       TRANS 40C

  Characteristics:
 

  •  for use with SYS 40
  •  deformation-resistant aluminium
  •  reflection-poor, black anodized
  •  theta-phi adjustment


 

Ways of installing:


  • with an M6 threaded hole
  •  on pin
  •  on a slide, RT 40


 

Options:


  •  gimbal


 

The transmitting mounts with a clear edge, TRANS 40C, are used especially for transmitting optics and beamsplitters. Alternatively, assembled-mounted optics with a 25-mm diameter or unmounted optics with a 25.4-mm (1") diameter may be put in the beam path.

 

Because of the openings at the carrier and clamping plate, the light path can be directed next to the optic at an angle or deflected.

The two fine-thread screws or micrometers allow a sensitive adjustment.

Transmitting mounts with a third fine-thread screw are available upon request.

 

The M2.5 and M6 threaded holes on both sides of the carrier plate permit a left and right-hand operation on slides RT 40 or pins STF  15.