Skip to Content

PS 35

             PS 35

Characteristics:

  • up to 3 axes controllable
  • for 2-phase step motors and DC servo motors
  • microstep mode up to 1/256
  • control unit in a housing with an LCD screen
  • USB and RS 232 interface
  • 8 TTL / analog inputs, as well as inputs for the encoder
  • 2 configurable limit switch inputs per axis
  • 5 TTL and 2 power outputs
  • point-to-point operation, circular and linear interpolation
  • programmable velocity profiles


 

Options:

 

  • joystick
  • stand-alone compiler
  • emergency-stop button


The PS 35 is a universal position control unit in a tabletop case with an LCD screen. It controls up to three axes with 2 phase step motors or brushed DC servo motors. Mixed operation of both motor types is possible. The display shows the status of each axis and its position incl. unit. Further, for each axis, a reset button is provided.

 

Micro-step mode with step motors guarantees smooth running and fine resolution. These motors can be operated up to 256 micro steps per full step using the software.

 

The PS 35 is operated and programmed by a PC. Several inputs and outputs are integrated to communicate with different peripherals, e.g., TTL and analog, as well as two power outputs for motor holding brakes.

 

The PS 35 provides point-to-point positioning in trapeze or S-curve velocity-time-profiles.

 

Supported operating systems: Windows XP, Windows Vista (32/64 bit), Windows 7 (32/64 bit), Windows 8 (32/64 bit), Windows 8.1 (32/64 bit) and Windows 10 (32/64-Bit).

 

For power supply, an external table power pack from the accessory list is required.

 

Foreign motors may be operated as well.