Skip to Content

MS 10


   ​  MS 10

Characteristics:


  •  accuracy according to DIN 863
  •  measuring drum and bush matte chrome plated
  •  graduation of the scale: 2 μm
  •  indication range of 12 mm and 15 mm, depending on the type
  •  spindle pitch: 0.10 mm
  •  setting sensitivity of about 200 nm per hand, approx. 20 nm with an offset screwdriver


 

The MS 10 micrometers have hardened and precisely grounded spindles. The measurement drum and bush are matte chrome-plated and therefore offer the greatest possible contrast to the scale lines. A hardened steel ball is embedded in the spindle as a thrust piece. Therefore, these micrometers are particularly suited as highly precise actuators.

 

The micrometers are available in the sizes MS 10-6 and MS 10-9. They differ in the spindle pitch of 0.10 mm from the micrometer MS with 0.25 mm and 0.5 mm pitch, respectively. The travel is 12 mm and, accordingly, 15 mm.

 

The micrometers MS 10 are equipped with a fastening thread of M6 x 0.5 or M9 x 0.5.

With the corresponding counter nuts, the micrometers can be fixed after mounting.