Skip to Content

KTA 40B


           KTA 40B

Characteristics:

  • for use with SYS 40 and SYS 65
  •  travel range 6 mm per axis
  •  fine-thread spindle with clamping
  •  aperture ø 11.2–15 mm
  •  deformation-resistant aluminium
  •  reflection-poor, black anodized


Ways of installing:


  •  horizontally on the slide
  •  vertically on a slide or pin (a pin adapter available as an accessory).

 

Option:

 

  •  with TRANS 40 (upon request)


 

The KTA 40B is a compact XY stage with 6 mm travel per axis and a free aperture of 11.2 to 15 mm in diameter.

 

The preloaded fine-thread spindle and the precisely adjusted dovetail guide allow very sensitive positioning. The position may be fixed by clamping the fine-thread spindles.

 

The KTA 40B may be installed horizontally and vertically. Vertically mounted on a slide RT 40, compatibility with the SYS 40 is provided.

 

The pin adapter, available as an accessory, allows integration into beam lines with an arbitrary beam height. The end plates reduce scattered light and may be removed without further restriction, increasing their compactness.

 

Optionally, the KTA 40B can be complemented with the mounting plate OH 40-Dxx-LTD40B to adjust mounted optics within the beam line.

A combination with a transmitting mount with additional degrees of freedom in θ and φ is also available upon request.