Characteristics:
- for use with SYS 65
- travel range 6 mm on each axis
- aperture ø 32 mm
- fine-thread spindle with clamping
- high load capacity
- deformation-resistant aluminium
- reflection-poor, black anodized
Ways of installing:
- on slide
- on pin
Option:
- wobble plate with ø 45 mm
The XY stages KT 65 have a high-precision double-dovetail guide.
It allows fine adjustment in both the X and Y directions. The aperture, with a diameter of 32 mm, is retained within the entire adjustment range.
The KT 65 is available with fine-thread spindles and graduated buttons. The travel is 6 mm on each axis.
Without the pin adapter plate, the cross table is used vertically. With a pin adapter plate, it can be used vertically or horizontally.