Skip to Content

KSHM 65

      KSHM 65

  Characteristics:


  •  for use with SYS 65
  •  deformation-resistant aluminium
  •  reflection-poor, black anodized
  •  for all orientations
  •  for optics with ø 38.1 mm (1.5") and a thickness of 6 mm
  •  mechanical limit switches
  •  DC geared motor


Ways of installing:


  •  on two slides RT 65-21-R-ZM
  •  on pin


Options:


  •  optics
  •  clamping claw for thickness of 7 mm up to 8.5 mm


The KSHM 65 motorized flip mirror holders can be installed in all orientations. They swing optics with ø 38.1 mm (1.5") - for example mirrors or beamsplitters - in an 45° angle into the light beam. The repeatability is less than 100 μrad and the switching time with the control unit NG-E02 is approx. 1.5 s.


To fasten the optics in the KSHM 65, they are pressed against three stops by using two clamping plates. So transmitting optics can also be put into the mounts. These are fastened on an wobble plate and set ±0.6° with the help of disc springs.


The motorized version of the KSH 65 can be fixed with the two slides RT 65-21-R-ZM directly on the S 65 LL system rails of the SYS 65 system. To mount them on STF 15 pins, there is a central M6 thread integrated in the bottom plate.