Skip to Content

K 50


   SW18 3D cutting head

  Characteristics:


  •  for use with SYS 40 and SYS 65
  •  deformation-resistant aluminium
  •  reflection-poor, black anodized


 

Ways of installing:

 

  •  with one M6 or two M4 threaded holes
  • on the pin, either directly or via a base plate, in which case the slot can be used to bring the reflecting surface onto the centerline of the pin.
  •  with two M4 screws on a slide (RT 65) or over the central M6 thread on a slide with a slotted hole (RT 65-40-R-LL).


 

The K 50 kinematic mirror mounts are suitable for front surface mirrors in the size range of 25 mm (25.4 mm) (1") to 50 mm (50.8 mm) (2").

 

With the slotted base plate FP-K50-LL, the mirror mounts  are for use with SYS 40 without a rail-slide combination.

 

The mirror holders are available for rectangular as well as round mirrors.

 

The mirror mounts can be supplied with fine-thread screws; versions with micrometers are available upon request.